Window Blinds Selection Tips

May 22, 2023

1. Observe the overall color of the shutters

The colors to be observed include the shutter blades, the upper and lower rails of the shutters, and all other small accessories such as wire racks, rotating rods, pull wires, copper bells, etc., to maintain the same overall color.

2. Check the smoothness of the blade

Feel the smoothness of the surface of the shutter blades and the wire frame by touching with your hands, and the qualified shutter products are smooth and flat, without any thorny feeling.

3. Open and close the blinds, and test whether the opening and closing function of the blind blades is normal

Turn the rotating rod of the shutter to open the blades, and each blade should maintain a good levelness, that is, the distance between the blades is even, and each blade should be kept straight without any sense of bending up and down. When the blades are closed, the blades should match each other without gaps for light leakage.

4. Check the degree of deformation resistance

After opening the louver blades, press down on the blades vigorously, let the stressed blades bend downward, and then let go quickly. If the blades can immediately return to the horizontal state without bending phenomenon, it shows that the quality of the louver is qualified.

5. Detect the function of automatic locking

When the blades are all closed, pull the pull wire to roll up the blades. At this time, pull the pull wire to the right, and the blade should be locked automatically, keeping the corresponding rolled up state, neither continuing to roll up nor loosening and sliding down. Otherwise, there is a problem with the locking function.

6. Look at the accessories adjustment lever

The adjustment rod of the blinds has two functions, one is to adjust the lift switch of the blinds, and the other is to adjust the angle of the blades. When inspecting the adjusting rod, first hang the blinds flat and try to pull it to see if the lifting switch is smooth, and then roll the adjusting rod to see if the flipping of the blades is also flexible.

7. Check the quality of pull wires and wire racks

Although the pull wires and wire racks are small accessories in the blinds, if these small accessories are of poor quality and are damaged during use, it will also affect the use of the blinds, so carefully check the quality of these accessories when purchasing blinds. quality.

8. Check the window opening method

There are many ways to open the blinds, such as fixed, flat, sliding, etc., choose according to your needs!

https://www.etexfabrics.com/

1fabric for roller blind

You Might Also Like